-
Inspection of the aluminum fuel lines forward of the fuel valve.
-
Means of preventing the hinge pins from vibrating loose and moving forward into the propeller.
-
Failure of the rod end fitting on the lower end of the landing gear jack strut on the two piece landing gear.
-
Approximate list of materials required to cover and finish the various component assemblies of the listed piper planes.
-
Installing a spring on the fuel shut-off to assist opening of the valve.
-
Addresses a potential for impulse coupling failure, which can result in total loss of engine power.
-
Information on the Marvel-Schebler Accelerator Pump Kit, part A666-581.
-
Replacing rubber stop discs with leather discs at the next periodic inspection.
-
Failures of lift struts caused by abuse, failure to replace lift struts after ground accidents, and the use of damaged parts from scrapped airplanes as service replacement parts.
-
Inspection to ascertain that the flattened tube end fitting at each end of the connector tube is riveted in place as shown in sketch.