-
Revises compliance time, purpose, and instructions for inspection and/or replacement of wing lift strut assembly. Also announces the availability of new sealed lift struts.
-
Inspection of the engine exhaust muffler and shroud assembly, carburetor heat shroud and air duct, support braces, clamps and brackets, exhaust stacks and manifolds.
-
Information regarding control cable tension adjustments per the Owner’s Manual for the 1974 and later PA-18 Super Cubs.
-
Inspection of the wing forward spar fuselage attachment assembly for cracks or corrosion, and replacing or repairing any cracked or corroded part.
-
Last Updated: 10/11/2021
in Technical Information StinsonThis 10 page document contains a summarized list of FAA Supplementary Type Certificates for Univair Aircraft and the Stinson 108 Series (T.C. A-767).
-
Last Updated: 05/06/2022
in Technical Information HardwareThis 4 page illustrated guide shows the AN3 through AN6264 hardware available from Univair.
-
Contact information for purchasing STC-SA578AL for the "Day and Night" Piper PA-12 flap installation.
-
Instructions for reissuance of FAA Form 8130-3 because of typographical errors.
-
Modifications to Tri-Pacer and Colt instrument panels to use modern 3-1/8" instruments per STC-SA00428SE.
-
Maintenance procedures for improving the reliability of the gascolator.