-
Continental engine mount bushing torque revision and update.
-
Substitution of 1101879 Generator and 118384 Regulator for 1101876 Generator and Regulator.
-
Instructions for installing the Ercoupe control wheel part number 415-52055-6.
-
This 101 page document contains the production history of Ercoupe 415-C thru 415-G airplanes, listed by serial number.
-
Erco never issued a “flight manual” for the 415-C or the 415-CD. In 1946 when most of the 415-C and 415-CD aircraft were manufactured, the Civil Aeronautics Authority (CAA) had no requirement for a flight manual. As such, the 415-C Weight and Balance form was and remains the only approved data requirement for the 415-C.
-
The 415 Series Ercoupe used three different elevators over the course of its production. The type and size of trim tab used on your airplane will depend on a number of factors.
-
Discussion of water in the fuel system, adjusting the tail height, and correct nose gear geometry in Ercoupe 415 Series airplanes.
-
List of attaching hardware for Ercoupe front and rear beams.
-
Reference: 45.11 (b) Removal of data plate.
-
Excerpt from FAA Order 8130.2F “Airworthiness Certification of Aircraft and Related Parts”