New Articles

  1. SL-303A Piper Aircraft Finishes

    A list of the various finishes used on the interior and exterior of all Piper aircraft models J-3 thru PA-30, dated 1950 through 1964.
  2. SL-327 Piper FAA Flight Standards Letter No. 434

    Federal Aviation Agency release pertaining to flight control hazards and protection from icing.
  3. SL-355 Piper Stainless Steel Control Cables

    The following listing indicates the part numbers of the old type stainless steel control cables and the replacement cables of new design which may be used.
  4. SM-05 Piper J-3/PA-11 Rigging Procedure

    Rigging and leveling procedures for Piper J-3 Cub Special and PA-11 aircraft.
  5. SM-10 Piper J-3/J-4/J-5 Rib Repair Diagram

    Rib repair diagram for Piper J-3, J-4, and J-5 aircraft.
  6. SM-13 Piper Engine Conversion - PA-11 65hp to 90hp

    List of parts required for the conversion of a PA-11 65hp to a PA-11 90hp.
  7. SM-17 Piper J-3 Gross Weight Increase

    Structural changes required for gross weight increases in model J3C-65 airplanes.
  8. SM-16 Piper Hours Required For Finishing a Plane

    Actual labor breakdown, in hours, of factory time required to cover and finish 100 each of the Piper PA-18, PA-18A and PA-22 models.
  9. SM-23 Piper Approximate Materials to Recover

    Approximate material required to recover Piper J-3, PA-11, PA-15, PA-17 and PA-18 aircraft using raw fabric and cellulose acetate butyrate dope.
  10. SB-48 Piper J-4 Muffler Inspection to Prevent Engine Failure

    Remedial measures for preventing muffler and engine failures.