Updated Articles

  1. SM-76 Piper Suggested Refinishing Procedures for Synthetic Fibers

    Refinishing procedure for airplanes covered with synthetic cloth.
  2. SM-73 Piper PA-22 Nose Wheel Oleo Boot Assembly

    Installation of this boot will reduce the possibility of moisture accumulating between the oleo assembly and the oleo housing.
  3. SM-70C Piper Application of Randacryl Lacquer

    Refinishing procedure for airplanes with enamel type finish and airplanes finished with acrylic lacquer.
  4. SM-69 Piper Flight Approval for PA-22 with Rear Door Removed

    An approval has been obtained for operating the PA-22 Tri-Pacer with the rear door removed (parachute jumping, photography, etc.).
  5. SM-65 Piper Safety Precautions

    Safety procedure instructions which must become an integral part of the aircraft owner's operational routine and/or preflight inspection.
  6. SM-60 Piper PA-22 Specifications and Performance

    Specifications and performance data for Piper PA-22 "125" and "135" airplanes.
  7. SM-59 Piper PA-20 Specifications and Performance

    Specifications and performance data for Piper PA-20 "125" and "135" airplanes.
  8. SM-51 Piper PA-18 Specifications and Performance

    Specifications and performance data for Piper PA-18 with Continental 90hp and Lycoming 108hp engines.
  9. SM-50 Piper PA-16 Specifications and Performance

    General specifications and performance data for Piper Clipper PA-16.
  10. SM-49 Piper PA-15/PA-17 Specifications and Performance

    General specifications and performance data for the Piper Vagabond PA-15 and the Piper Vagabond Trainer PA-17.