Updated Articles

  1. VSP-204 Piper Greasing Wheel Bearings on Cleveland Wheels

    Emphasizes proper wheel bearing greasing procedures.
  2. VSP-119 Piper Oil Filter Change and Screen Cleaning

    Instructions for filter replacement or pressure screen cleaning for new, remanufactured, or newly overhauled engines and for engines with any newly installed cylinders.
  3. VSP-100 Piper Defective Diagrams in Master Cylinder

    Information on replacing an existing diaphragm suspected to be defective in master brake cylinders installed in listed Piper aircraft models.
  4. VSP-98 Piper Reference Lycoming SB No. 486

    Pertains to the inspection of the Single Belt Driven Ring Gear Support Assembly as installed on the affected aircraft above.
  5. VSP-62 Piper Inspection of Impulse Coupling Cam Assemblies

    Addresses a potential for impulse coupling failure, which can result in total loss of engine power.
  6. VSP-30 Piper Impulse Coupling Inspection

    The attached publications may affect Bendix equipment installed in Piper airplanes.
  7. VSP-5 Piper Use of Alternate Aviation Grade Fuels

    Use of alternate aviation grade fuels in engines originally certificated on 80/87, 91/96 and 100/130 grade fuels.
  8. VSP-1 Lycoming Oil Pump Impeller and Drive Replacement

    Replacing the oil pump drive shaft and drive impeller in select Lycoming engines.
  9. SM-76 Piper Suggested Refinishing Procedures for Synthetic Fibers

    Refinishing procedure for airplanes covered with synthetic cloth.
  10. SM-73 Piper PA-22 Nose Wheel Oleo Boot Assembly

    Installation of this boot will reduce the possibility of moisture accumulating between the oleo assembly and the oleo housing.