-
Summary of service difficulties experienced with the electrical system in the Model PA-12 and recommendations as to how to remedy these difficulties.
-
General specifications and performance data for Piper Clipper PA-16.
-
Last Updated: 10/11/2021
in Technical Information Stinson
Corrections to the Stinson Parts Manual regarding the axle nuts.
-
Replace each of the four internal wrenching bolts which attach the engine to the engine mount with an AN 6 bolt and a special offset washer.
-
Possibility that the upper enclosure door may be torn from the airplane and cause damage to other parts of the airplane when flying with the door open.
-
Replace the adjustment screw in the lower end of the control stick horn, with an AN 520-10-44 screw in order to prevent interference with the lower fuselage skin.
-
Field approvals for Piper PA-12 engines not listed in the CAA specifications.
-
Inspect the wing leading edge for buckled nose ribs or loose PK screws.
-
Reinforcing the rudder horn to prevent the rudder from breaking loose during takeoff.
-
Structural changes required for gross weight increases in model J3C-65 airplanes.