-
Discussion concerning the useful life of the eight rubber engine support bushings, Lycoming part number 60883.
-
Rigging and leveling procedures for Piper PA-16.
-
Inspection and alteration of tail bulkhead and fin spar for clearance of elevator horn.
-
Copy of the Flottorp F12 Constant Speed Propeller Service Manual.
-
Certain combinations of atmospheric conditions, aircraft attitudes, fuel levels and/or normal flight maneuvers, may result in a condition where fuel starvation can occur.
-
Rework to improve the life of the outer cylinder for the steel nose gear, and the need for oversize pins to permit the salvaging of the outer cylinder in the Electrol strut.
-
Last Updated: 10/11/2021
in Technical Information ErcoupeData plate part numbers for Erocupe and Stinson aircraft.
-
Inspection and rework to detect the use of improper screws attaching the left and right rudder pedal shaft assemblies to the nose wheel steering tie rods.
-
Installation of the header tank kit to prevent possible malfunctioning of the engine due to insufficient fuel flow in prolonged glides or dives with less than five gallons of fuel in the main tank.
-
Misalignment of the oil radiator lines on the Lycoming 0-290-D2 135 horsepower engines at the point where they pass through the rear engine baffle.