Popular Articles

  1. AD 73-17-01 Fuel Transfer Pump Placard

    To advise the pilot concerning proper fuel transfer pump operation, install Javelin Placard 782-14 or an equivalent FAA-approved placard, adjacent to the fuel transfer pump switch.
  2. Piper PA-22 STC-SA45RM Conversion Belly Pan Fit

    Issues with the Piper PA-22 Taildragger Conversion belly pans not fitting correctly on some aircraft.
  3. AD 79-22-01 Exhaust System

    Steps to prevent exhaust system cracking.
  4. EB-15 Luscombe Fuselage Skin Cracks

    Recommended repair for fuselage skin cracks at rear wing spar.
  5. SL-303A Piper Aircraft Finishes

    A list of the various finishes used on the interior and exterior of all Piper aircraft models J-3 thru PA-30, dated 1950 through 1964.
  6. Piper Interchange and Applications List

    Piper parts applicability from parts manuals.
  7. AD 67-06-03 Rudder Bellcrank

    To prevent loss of rudder control inspect the rudder control system and modify the rudder bellcrank assembly in a manner prescribed in this AD.
  8. AD 57-02-01 Rudder Horn Attachment

    Failures of the rudder horn attachments, attributed to improper ground handling technique rather than to unusual flight loads.
  9. SM-59A Ercoupe Assembly and Installation of Rudder Pedals

    A placard titled "INTENTIONAL SPINS PROHIBITED," must be installed in full view of the pilot on all 415-C or CD Ercoupes that have rudder pedals.
  10. EB-03 Luscombe Rudder Hinge

    Inspect the attachment of lower hinge and if cracks have developed in the spar or rib reinforce with .040 dural or steel channel as shown.