-
Prevention of potential in-flight fire due to fuel line failure.
-
The use of standard inspection methods to determine any presence of unauthorized holes or cracks in the main spar assembly or any components thereof.
-
Last Updated: 10/08/2021
in Technical Information Ercoupe
List of attaching hardware for Ercoupe front and rear beams.
-
Last Updated: 10/11/2021
in Technical Information Scott
Scanned pages from a 1944-45 Supply Division, Inc. catalog showing Scott tailwheels.
-
Information on stack exhaust systems on the older Model 8 airplanes supplying marginal carburetor heat under severe or unusual atmospheric conditions. Information on Harding fuel selector valves presenting some operational and service difficulties.
-
Replacing Facet induction air filters (manufactured by the Purolator Products Company) due to cracking, splitting, crumbling, and deterioration.
-
Modification and reinforcement of landing gear to prevent cracks in the leading edge of the streamlined tube where it joins the inboard end of the axle.
-
Identification of Univair Manufactured Parts (TC and FAA-PMA).
-
Excerpt of FAR Part 43 Maintenance, Preventive Maintenance, Rebuilding, and Alteration.
-
Reported cases of failure of a tail brace wire (10074-02 or 10074-03) on the above listed airplanes.