-
Covers the tightening of the propeller hub bolts on the Continental hub used with the Continental C-75 and C-85 engines.
-
Reports that a certain batch of Resistoflex was used in fuel systems which caused trouble. This batch, manufactured during third quarter of 1945, can be identified by marking LP-3-45.
-
A change has been made to Memorandum No. 27 regarding the adhesive used to cement the walkway to the center section.
-
Necessary redesign of certain parts of the fuel system due to operational difficulties and failures which have occurred in the field.
-
Recommended alternative for sloshing material outlined in service memorandum 33.
-
A list of propellers that have been approved by the C.A.A. for installation on the Ercoupe.
-
Instructions on the care and proper maintenance of the Ercoupe electrical system.
-
Undesirable vibration occasionally occurs in the Ercoupe airplane and the cause has been traced to the nose landing gear.
-
Installation instructions for starter, generator, voltage regulator and battery.
-
All planes with effective serial numbers 1623 and up have the redesigned trim system installed. All planes shipped by rail will be shipped as follows.