New Articles

  1. AD 48-13-03 Battery Hold Down Brackets

    Battery short circuits caused by defective battery holddown brackets.
  2. AD 48-01-02 Cowl Support Braces

    Inspect for interference between the nose cowl and starter ring gear casting and for tightness of the cowl attachments.
  3. AD 47-22-03 Landing Gear Tie Strap

    Reinforce the upper end of the tie strap on the landing gear with a 4130 steel plate.
  4. AD 46-36-02 Airscoop Rework

    Reports of loosening of the cap screws attaching the air scoop to the carburetor, thus creating a hazard.
  5. AD 50-23-01 Shock Strut Fittings

    Inspect landing gear shock strut end fittings for cracks or other defects in the small bend radii.
  6. AD 81-06-08 Lower Fuselage Attachment Tab

    How to prevent failure of the lower fuselage attachment tab which connects the lower horizontal stabilizer brace wire to the fuselage.
  7. AD 54-19-01 Brake Line Cover Plate

    Instances of excessive CO concentration in the cockpit when the dusting venturi is used.
  8. AD 60-10-08 Fuel Selector Valve

    Several accidents have occurred involving engine fuel starvation attributed to a lack of detent action in the fuel selector valve.
  9. AD 53-04-01 Control Stick Attachment

    How to prevent the control stick inadvertently pulling out of the socket.
  10. AD 51-19-02 Oil Radiator Hose

    Inspection of overage oil radiator hose to determine that hose is marked with a solid white line and a broken red line and AN H-35 or MIL H-6000 are installed.