Updated Articles

  1. SB-16 Ercoupe Replacement of Magnesium Die Cast Nose Wheel

    Procedures for replacing Magnesium Die Case Nose Wheel with a Permanent Mold Aluminum Alloy Nose Wheel.
  2. SB-13A Ercoupe Supplement - Change of Aileron Control Stop

    Supplement to Ercoupe Service Bulletin No. 13 Change of Aileron Control Stop.
  3. SB-13 Ercoupe Change of Aileron Control Stop

    Steps to provide a more positive locking action on the aileron control stop.
  4. SM-52 Ercoupe Torque Applied to Tighten Nipple, AN911-2

    Excessive tightening of nipple AN911-2 may start internal cracks, which will eventually cause complete failure of the nipple.
  5. SM-13 Ercoupe Safety Warning - Stepping Into Prop

    Turning propellers always present a dangerous situation. It is urged that precaution be taken and procedures established for safe deplaning of passengers.
  6. SM-40 Ercoupe Starter Control Clearances

    Proper adjusting of starter control clearances will reduce the possibility of the starter being accidentally engaged while the motor is running.
  7. SM-41 Ercoupe Rebuilding of Nose Landing Gear Assembly

    Information and instructions for maintaining and rebuilding the Ercoupe nose landing gear assembly.
  8. SM-30 Ercoupe Elevator, Trim Tab Anchor

    Part No. 415-22001 (elevator assembly) becomes obsolete and is replaced by part No. 415-22017, an improved type of elevator assembly which incorporates a movable hinged section in the trailing edge.
  9. SM-33 Ercoupe Repair of Aluminum Fuel Tanks

    Describes a method of repair for aluminum fuel tanks, seam leakage or seepage.
  10. SM-33A Ercoupe Repair of Aluminum Fuel Tanks, New Sloshing Compound

    Recommended alternative for sloshing material outlined in service memorandum 33.