Popular Articles

  1. SM-12 Piper Shock Cord Application

    Shock cord application chart for listed Piper models.
  2. SM-76 Piper Suggested Refinishing Procedures for Synthetic Fibers

    Refinishing procedure for airplanes covered with synthetic cloth.
  3. SL-241 Piper PA-22 Cigarette Lighter Malfunction

    Solution for cigarette lighter popping out of its socket after becoming fully heated.
  4. SB-522 Piper Wing Fuel Tank Cap Modification

    Reports of collapsed wing mounted fuel tanks due to inadequate venting of the tank.
  5. SL-233 Piper Fuel Selector Valve

    The new Fuel Selector Valve, part number 11383-04, should be used for all service replacements and all new installations on Piper PA-18, PA-20 and PA-22 airplanes equipped with two wing fuel tanks.
  6. SM-12 Piper Shock Cord Application

    Shock cord application chart for listed Piper models.
  7. SL-100 Univair Stamped Piper Aluminum Rib Field Repair Process

    Outlines the repair of Univair STC'd Stamped Ribs in accordance with the original STC and FAA Advisory Circular AC 43.13-1B.
  8. SM-04 Piper Brake and Oleo Strut System Fluid Usage

    Table showing the type of brake fluid used in airplanes manufactured by the Piper Aircraft Corporation.
  9. SM-28 Piper Miscellaneous FAA Field Approvals

    The following installations have been FAA approved in the field. The party securing the approval is also listed.
  10. SL-60 Stinson Use of Radio When Starting Engine

    It is recommended that the radio be turned off during the time that the engine starter is being used.