Popular Articles

  1. AD 47-43-08 Propeller Blade Retainer Ferrule

    Removing the R003-201 propeller blades and visually inspecting the propeller blade retainer ferrule for cracks.
  2. AD 47-20-04 Baggage Compartment Zipper

    A positive locking device must be installed on the zipper in the baggage compartment bottom to prevent articles to fall through and foul the controls.
  3. AD 73-15-05 Hopper Bay Longerons Cracks

    Inspection of the left and right upper longerons for cracks using the dye penetrant technique.
  4. SA MISC/TP-1005B Piper Installation of Wood Circuit Protectors

    Wood circuit protectors incorporate a safety feature that allows the circuit to be broken manually by pulling out the circuit protector push-pull button.
  5. SB-1026 Piper Inspection of Dry Air Pump Flexible Couplings

    A condition exists where the flexible coupling connecting the vacuum pump may fail prematurely, causing a loss of vacuum/pressure with the resultant loss of vacuum/pressure instruments and other appliances.
  6. Piper PA-18 Fuel Valve and Line Fit Problem

    Solution for fuel line installation that is too close to the valve.
  7. SB-112B Piper J-3 Thru PA-17 Service Inspection Notes

    These inspection notes are issued as a recommended check list to assist owners, operators, and maintenance personnel in keeping their Piper airplanes in an airworthy condition.
  8. AD 57-20-01 Fireproof Steering Link Boot

    Instructions to prevent the entry of fire and fumes into the cabin compartment in the event of a powerplant fire.
  9. AD 55-22-03 Fuel Tank Cap

    Steps to prevent rain water from entering the fuel tanks.
  10. SM-43 Ercoupe Modification of Aluminum Tanks and Fuel System Lines

    There have been two minor modifications in the tanks and fuel system lines since the change from ternplate to aluminum gasoline tanks, which occurred on Ercoupe Serial No. 2623.