Popular Articles

  1. SA 18-2A Piper PA-18 Aileron and Flap Hinge Bracket Attaching Hardware

    Correcting a condition that could cause loss of security of one or more screws which attach the aileron and flap hinge brackets.
  2. SM-37 Approval of Additional Propellers for Ercoupe

    A list of propellers that have been approved by the C.A.A. for installation on the Ercoupe.
  3. SM-23 Ercoupe Installation of Starter, Generator, Voltage Regulator and Battery

    Installation instructions for starter, generator, voltage regulator and battery.
  4. SL-828 Piper PA-18 Electrical System Refinement

    Materials and instructions for replacing overvoltage relay and starter power relay in the PA-18 electrical system.
  5. SB-122 Piper Fuel Grade Specification for Lycoming O-290-D2 Engines

    Correction to the fuel grade specification in flight manuals and fuel tank placards for the Lycoming O-290-D2 engines.
  6. AD 94-16-02 Stabilizer Forward Attach Fitting

    Inspecting the existing aluminum vertical stabilizer forward attach fitting for cracks, and replacing any cracked parts.
  7. Piper PA-12 Paint Scheme

    Downloadable paint scheme sheet for Piper PA-12.
  8. AD 71-20-04 Lower Fuselage Longeron

    How to prevent structural failure of the lower longerons.
  9. SA MISC/TP-1001A Piper Engine Mounting

    Tightening engine mounting bolts to obtain a torque of (40) inch pounds.
  10. Ercoupe Control Wheel Installation Instructions

    Instructions for installing the Ercoupe control wheel part number 415-52055-6.