Popular Articles

  1. SB-103 Piper J-3/PA-11 Shock Strut Stop Discs

    Replacing rubber stop discs with leather discs at the next periodic inspection.
  2. SB-935 Piper PA-18 Properly Installing the Aircraft Serial Number Data Plate

    Installing the Name Plate Installation Kit on airplanes with improperly installed serial number data plates.
  3. SM-44 Piper J-5A/B Specifications and Performance

    General specifications for Piper Cub Cruiser J5A-75 and J5B-75 (commercial models).
  4. SB-153A Piper PA-22 Brake Master Cylinder Diaphragm

    Failures of the diaphragm in the B711 Scott Master Cylinder used on the PA-22 Tri-Pacer within 300 or 400 hours of operation.
  5. SL-303A Piper Aircraft Finishes

    A list of the various finishes used on the interior and exterior of all Piper aircraft models J-3 thru PA-30, dated 1950 through 1964.
  6. Ercoupe Nose Gear Geometry - Coupe Capers Sept 1991

    Discussion of water in the fuel system, adjusting the tail height, and correct nose gear geometry in Ercoupe 415 Series airplanes.
  7. SB-148A Piper PA-18/PA-22 Fuel Tank Caps

    A recent design change to the fuel tank caps has created a possible hazard to the venting system and it is therefore requested that the caps be reworked in the following manner.
  8. SB-351 Piper PA-20/PA-22 Fuel Line Replacement

    A recent survey of PA-20 and PA-22 aircraft has revealed that a certain number of these airplanes are operating with the strainer to carburetor flexible fuel line in a deteriorated condition.
  9. AD 94-16-02 Stabilizer Forward Attach Fitting

    Inspecting the existing aluminum vertical stabilizer forward attach fitting for cracks, and replacing any cracked parts.
  10. VSP-118 Piper Lycoming Service Instruction No. 1267C "Piston Pin Plug Usage"

    Information regarding piston pin plug replacement during engine overhaul.