-
The possibility exists where the airplane's gyro vacuum/pressure system may become contaminated by loose particles originating from the air filter element.
-
Adding strips of felt to the gas tank cover to improve the clearance between the cover reinforcements and the tank.
-
Inquiries relative to the new "Duraclad" finish on our 1951 Model airplanes.
-
Remedy for manifold pressure gauges installed in 1951 model airplanes giving unsatisfactory service.
-
To prevent excessive wear of the primer line, resulting in fuel leakage and possible cabin fire, it is recommended that primer lines be clamped and/or re-routed per the sketch included with this letter.
-
To prevent excessive wear of the primer line, resulting in fuel leakage and possible cabin fire, it is recommended that primer lines be clamped and/or re-routed per the sketch included with this letter.
-
Discussion concerning the useful life of the eight rubber engine support bushings, Lycoming part number 60883.
-
Information concerning the use of safety belts which do not have TSO approval.
-
The new Fuel Selector Valve, part number 11383-04, should be used for all service replacements and all new installations on Piper PA-18, PA-20 and PA-22 airplanes equipped with two wing fuel tanks.
-
The RPM restriction placard is no longer necessary and can be removed from above mentioned airplanes.