New Articles

  1. SM-29 Ercoupe Provision for Locking Cabin Windows

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Provisions for locking the sliding windows with or without the green sunshade.

  2. SM-30 Ercoupe Elevator, Trim Tab Anchor

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Part No. 415-22001 (elevator assembly) becomes obsolete and is replaced by part No. 415-22017, an improved type of elevator assembly which incorporates a movable hinged section in the trailing edge.

  3. SM-32 Ercoupe Brake Pedal Arm (415-33438) - Effect of Change

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    The brake pedal arm has been redesigned as a result of reported failures on this part in the field.

  4. SM-34 Ercoupe Inspection of Nose Landing Gear Wheel - Die Cast

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    In 1946, the aluminum alloy permanent mold nose landing gear wheel was replaced by a nose wheel of die-cast magnesium. It has come to our attention that a few failures of the die-cast wheels have occurred.

  5. SM-35A Rev A Ercoupe Rigging - Elevator, Models E and F

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Suggested procedure for use in rigging, or making adjustments to the rigging, of the new elevator type in 1948 Ercoupe models.

  6. SM-36 Ercoupe Engine Cowling Fastener Change From Dzus to Camloc

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Effective on all Ercoupes serially numbered 2623 and subsequent, the engine cowling will be secured with Camloc fasteners.

  7. SM-40 Ercoupe Starter Control Clearances

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Proper adjusting of starter control clearances will reduce the possibility of the starter being accidentally engaged while the motor is running.

  8. SM-45 Ercoupe Outer Panel Leading Edge Skin Dents

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Information of the effect of dents in the outer panel leading edge skin.

  9. SM-46 Ercoupe Relubrication of Sealed Bearings

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Detailed instruction on the relubrication of sealed bearings used in the Ercoupe.

  10. SM-18 Reinforcement of Engine Side Cowls

    Created On: 09/09/2021 in Service Bulletins, Letters and Memos Ercoupe and Forney
    Changes to prevent cracks occurring in the region of the uppermost rivet used to attach the stiffener to the side cowl.
Copyright © 2023 Univair Aircraft Corporation. All rights reserved.