-
Reported failures of the ribstitching both in the wing and control surface covering which may result in the fabric being torn from the structure while in flight.
-
Instructions for repairs of minor cracks, pin holes and failed spot welds in the stainless steel wing tanks.
-
Wing aileron bellcrank brackets failing due to parking or staking out the airplane with the tail into the wind without securing the controls.
-
Reports of the listed model airplanes that the engine will not operate properly with low fuel in the 7 gallon header tank.
-
Rigging and leveling procedures for Piper J-3 Cub Special and PA-11 aircraft.
-
Rigging and leveling procedures for Piper J-3 Cub Special and PA-11 aircraft.
-
Failures of lift struts caused by abuse, failure to replace lift struts after ground accidents, and the use of damaged parts from scrapped airplanes as service replacement parts.
-
These inspection notes are issued as a recommended check list to assist owners, operators, and maintenance personnel in keeping their Piper airplanes in an airworthy condition.
-
These inspection notes are issued as a recommended check list to assist owners, operators, and maintenance personnel in keeping their Piper airplanes in an airworthy condition.
-
These inspection notes are issued as a recommended check list to assist owners, operators, and maintenance personnel in keeping their Piper airplanes in an airworthy condition.