-
List of materials used to create an abrasive walkway on the center section, and instructions for its application.
-
Correction to Service Letter Number 126 regarding Metal Spar Splice Kits.
-
These inspection notes are issued as a recommended check list to assist owners, operators, and maintenance personnel in keeping their Piper airplanes in an airworthy condition.
-
Failure of the stabilizer rear bearing bracket as a result of improper or insufficient lubrication.
-
Testing for secure attachment of flexible hose end fittings.
-
How to fix difficulties with the fabric where it attaches to the fuselage under the windshield top and/or directly over the rear edge of the windshield top attachment channel.
-
This letter is to advise all concerned that as of September 1st, 1962, the Piper Aircraft Corporation considers the following aircraft models obsolete inasmuch as they have been out of production for at least seven years.
-
Table showing the type of brake fluid used in airplanes manufactured by the Piper Aircraft Corporation.
-
Instructions for installing shock cords on Piper PA-12 and PA-14 aircraft.
-
Driving rain or washing may cause an accumulation of water in nose wheel oleo housing which can freeze in lower bearing and render rudder system inoperative.