Popular Articles

  1. SB-46 Piper J-3/J-4 Strainer Attachment Fittings

    Failure of strainer/carburetor attaching fittings which may be attributed metal fatigue.
  2. SB-87 Piper J-5A Installation of Windshield

    Materials list and procedure for installing a Plexiglas windshield.
  3. SL-214 Piper PA-20/PA-22 Navigation Light Switch

    Update to Service Letter #209.
  4. SB-05 Luscombe Tail Tray Reinforcement

    How to repair cracks in the tail tray (horizontal bulkhead located in the tail of the fuselage just under the horizontal stabilizer).
  5. Piper J-2 thru PA-17 Inspection Sheet

    Subject: This comprehensive inspection report provides recommendations for an inspection program per requirements of FAR Part 43 and Advisory Circular 91-60 (The Continued Airworthiness of Older Airplanes). Applicability:   J-2 Series Cub J-3...
  6. SB-135 Piper PA-20/PA-22 Fuel Selector Valve Pointer

    Instructions for correcting an incorrectly installed pointer on the fuel selector valve.
  7. VSP-5 Piper Use of Alternate Aviation Grade Fuels

    Use of alternate aviation grade fuels in engines originally certificated on 80/87, 91/96 and 100/130 grade fuels.
  8. SB-91 Piper J-3 Fuel Strainer Installation Inspection

    Inspect for proper installation of the fuel strainer port.
  9. SL-155 Piper PA-18 Muffler Tailpipe Shroud

    Carburetor air take-off tube on the muffler tail pipe shroud has been cracking at the weld, resulting in partial loss in carburetor heat.
  10. SL-223 Piper Engine Support Bushings

    Discussion concerning the useful life of the eight rubber engine support bushings, Lycoming part number 60883.