New Articles

  1. SB-522 Piper Wing Fuel Tank Cap Modification

    Reports of collapsed wing mounted fuel tanks due to inadequate venting of the tank.
  2. SB-573 Piper Wing Fuel Tank Cap Modification

    A recent fuel tank collapse was attributed to inadequate venting, caused by obstruction of the cap vent holes installed per Piper Service Bulletin No. 522.
  3. SB-111 Piper Torque Tube Connector Tube Assembly

    Inspection to ascertain that the flattened tube end fitting at each end of the connector tube is riveted in place as shown in sketch.
  4. SB-118 Piper Battery Box Lid Modification

    Modifying the battery box lid to eliminate the possibility of "shorting" the battery terminal wing nuts.
  5. SB-141 Piper Fuel Selector Valve

    Possibility of the fuel valve detent pins in a few valves were improperly centered, thus preventing positive indication of valve position.
  6. SB-165 Piper Aileron Hinge Reinforcing Bracket

    Replacing aluminum aileron hinge reinforcing bracket with one made of steel, part number 10931-02.
  7. SB-165 Piper Aileron Hinge Reinforcing Bracket

    Replacing aluminum aileron hinge reinforcing bracket with one made of steel, part number 10931-02.
  8. SB-174B Piper Inspection and Maintenance of Fuselage Fabric Around Windshield Top

    How to fix difficulties with the fabric where it attaches to the fuselage under the windshield top and/or directly over the rear edge of the windshield top attachment channel.
  9. SB-174B Piper Inspection and Maintenance of Fuselage Fabric Around Windshield Top

    How to fix difficulties with the fabric where it attaches to the fuselage under the windshield top and/or directly over the rear edge of the windshield top attachment channel.
  10. SB-354B Piper Fuel Selector Valve Lubrication

    Checking fuel selector valve for ease of rotation and instructions for lubricating.