New Articles

  1. Piper J-2 thru PA-17 Inspection Sheet

    This comprehensive inspection report provides recommendations for an inspection program per requirements of FAR Part 43 and Advisory Circular 91-60 (The Continued Airworthiness of Older Airplanes).
  2. Piper Jack Screw Grommets and Inspection Plates - Wrong Shape?

    Explanation why the shape of grommet U10293-000 doesn’t match the shape of inspection plates U60742-000 and U60742-001.
  3. Piper J-3 Aileron Cable Pulley Installation

    Article titled "J-3 Aileron Cable Pulley Installation" by Joel Gehring from Cub Clues #139 March/April 2007.
  4. Piper PA-18 150hp Primer System Drawing

    Drawing for the Piper PA-18 150hp Primer System.
  5. Taildragger Bulletin 1033 Rev. D Conversion Instructions

    Instructions for installing conventional landing gear on Piper PA-22 Series aircraft per STC SA45RM.
  6. Report 939 Conversion of Piper PA-18A

    Conversion instructions for changing Piper PA-18A “150” airplane from Normal and Utility Category (Standard Airworthiness Certificate) to Restricted Category (Restricted Airworthiness Certificate).
  7. Piper PA-22 Grommets for Covering

    Table of grommets used in wings and fuselage for covering Piper PA-22 aircraft.
  8. Piper PA-16 Attach Hardware Lists

    Download PDFs of various Attach Hardware Lists for Piper PA-16 (Landing Gear, Lift Strut, and Tailwheel Spring).
  9. Piper PA-18 Control Cable Tension

    Information regarding control cable tension adjustments per the Owner’s Manual for the 1974 and later PA-18 Super Cubs.
  10. Piper PA-18 Fuel Valve and Line Fit Problem

    Solution for fuel line installation that is too close to the valve.