New Articles

  1. SB-65 Piper J-4/J-5 Fuel Tank Repairs

    Instructions for repairs of minor cracks, pin holes and failed spot welds in the stainless steel wing tanks.
  2. SM-06 Piper J-4 Rigging Procedure

    Rigging and leveling procedures for Piper J-4.
  3. SB-87 Piper J-5A Installation of Windshield

    Materials list and procedure for installing a Plexiglas windshield.
  4. SM-07 Piper J-5 Rigging Procedure

    Rigging and leveling procedures for Piper J-5 aircraft.
  5. SB-74 Piper J-4 Rigging Procedure

    Correction to the rigging procedure found on Page 3, Section 2, of the Piper J-4 Service Manual.
  6. SB-79 Piper J-4 Nose Rib Structure Reinforcement

    Describes the method to be used in reinforcing the nose structure of the ribs.
  7. SB-104 Piper PA-11/PA-12 Fuel Line Fitting

    Loose end fitting on the flexible fuel line connecting the fuel strainer to the carburetor.
  8. SB-106 Piper PA-14 Rear Flap Pulley Bracket Reinforcement

    Failure of the rear flap pulley bracket probably due to insufficient weld area in conjunction with operation of flaps at excessive speeds.
  9. SB-109 Piper PA-12/PA-14 Cracking of Aileron and Flap Bellcranks

    Reports of cracks in the cast aluminum aileron bellcranks due to excessively tightening of the bolt which attaches the aileron push rod to the bellcrank.
  10. VSP-1 Lycoming Oil Pump Impeller and Drive Replacement

    Replacing the oil pump drive shaft and drive impeller in select Lycoming engines.