-
Information and instructions for maintaining and rebuilding the Ercoupe nose landing gear assembly.
-
Failure of a fuel pump pressure line, due to chafing on the nose cowl has resulted in a change in the routing of the fuel pump lines.
-
Excessive tightening of nipple AN911-2 may start internal cracks, which will eventually cause complete failure of the nipple.
-
Installation instructions and materials list to reinforce the rear center section beam with an additional stiffener angle, part number 415-13109.
-
Instructions for the installation of the Trim-O-Matic (T-O-M).
-
In keeping with the many requests we have had for rudder pedal installations in the Ercoupe, we are now adding SK-21 Rudder Pedal Kit to our long list of optional equipment and accessories.
-
A new service assembly has been developed and approved by the C.A.A. This assembly is designed to simplify repair of damage to the inboard end of the outer panel rear spar.
-
List of batteries eligible for installation in Ercoupe/Forney/Alon/Mooney M-10 aircraft.
-
The tube clamps used to secure the muffler to the exhaust stacks have not been providing satisfactory service in that they permit the muffler to loosen and move around.
-
Methods for inspection of control surfaces for cracks and excessive play and checking controls for excessive movement.