New Articles

  1. SM-22 Piper Materials to Recover Component Parts

    Approximate list of materials required to cover and finish the various component assemblies of the listed piper planes.
  2. SM-04 Piper Brake and Oleo Strut System Fluid Usage

    Table showing the type of brake fluid used in airplanes manufactured by the Piper Aircraft Corporation.
  3. SM-04 Piper Brake and Oleo Strut System Fluid Usage

    Table showing the type of brake fluid used in airplanes manufactured by the Piper Aircraft Corporation.
  4. SM-23 Piper Approximate Materials to Recover

    Approximate material required to recover Piper J-3, PA-11, PA-15, PA-17 and PA-18 aircraft using raw fabric and cellulose acetate butyrate dope.
  5. SM-28 Piper Miscellaneous FAA Field Approvals

    The following installations have been FAA approved in the field. The party securing the approval is also listed.
  6. VSP-62 Piper Inspection of Impulse Coupling Cam Assemblies

    Addresses a potential for impulse coupling failure, which can result in total loss of engine power.
  7. VSP-100 Piper Defective Diagrams in Master Cylinder

    Information on replacing an existing diaphragm suspected to be defective in master brake cylinders installed in listed Piper aircraft models.
  8. SL-100 Univair Stamped Piper Aluminum Rib Field Repair Process

    Outlines the repair of Univair STC'd Stamped Ribs in accordance with the original STC and FAA Advisory Circular AC 43.13-1B.
  9. SL-100 Univair Stamped Piper Aluminum Rib Field Repair Process

    Outlines the repair of Univair STC'd Stamped Ribs in accordance with the original STC and FAA Advisory Circular AC 43.13-1B.
  10. SL-100 Univair Stamped Piper Aluminum Rib Field Repair Process

    Outlines the repair of Univair STC'd Stamped Ribs in accordance with the original STC and FAA Advisory Circular AC 43.13-1B.